Product Description:

GEM Air Receiver helps to

  • Store compressed air.
  • Condense and trap the moisture in the compressed air and to let the impurities settle down before air passes into the piping.
  • Equalise pressure variations in the pipe.
  • Prevent short cycle loading and unloading of the compressor.

Gem air receiver are dimensioned to suit the compressor flow rate, the regulating system, the working pressure and the expected variations in the air consumption.

Product USP:

  • Designed as per IS7938
  • Hand and man holes
  • Working pressure up to 40 bar
  • Shell / Dish as per ASME Sec VIII and IS2825

Technical Specifications:

Model Capacity m³ Diameter (inner) mm Overall Height mm Working Pressure bar Shell/Dish Thickness mm In/Out Connection Design Presure bar Hydro Test Pressure bar Hand Hole / Man Hole
VAR025 0.25 490 1610 7 5/5 3/4″ BSP 8 12 Hand Hole
10.5 10.5 12 18
12.5 12.5 14 21
VAR50 0.5 610 2005 7 5/5 1″ BSP 8 12 Hand Hole
10.5 5/6 12 18
12.5 6/8 14 21
VAR075 0.75 734 1900 7 5/6 1 1/2″ BSP 8 12 Hand Hole
10.5 5/6 12 18
12.5 8/8 14 21
VAR100 1.0 734 2750 7 5/6 1 1/2″ BSP 8 12 Hand Hole
10.5 8/8 12 18
12.5 10/10 14 21
VAR150 1.5 980 3165 7 5/6 2″ BSP 8 12 Man Hole 475x425mm
10.5 8/8 12 18
12.5 10/10 14 21
VAR200 2.0 980 3165 7 5/6 2″ BSP 8 12 Man Hole 475x425mm
10.5 8/8 12 18
12.5 10/10 14 21
VAR250 2.5 980 3820 7 5/6 2″ NB FLG 8 12 Man Hole 475x425mm
10.5 8/8 12 18
12.5 10/10 14 21
VAR300 3.0 980 4485 7 5/6 4″ NB FLG 8 12 Man Hole 475x425mm
10.5 8/8 12 18
12.5 10/10 14 21
VAR400 4.0 1289 3575 7 8/8 4″ NB FLG 8 12 Man Hole 475x425mm
10.5 10/10 12 18
12.5 12/12 14 21
VAR500 5.0 1289 4340 7 8/8 4″ NB FLG 8 12 Man Hole 475x425mm
10.5 10/10 12 18
12.5 12/12 14 21
VAR600 6.0 1289 5095 7 8/8 6″ NB FLG 8 12 Man Hole 475x425mm
10.5 10/10 12 18
12.5 12/12 14 21
VAR800 8.0 1464 5300 7 8/10 8″ NB FLG 8 12 Man Hole 475x425mm
10.5 12/12 12 18
12.5 12/14 14 21
VAR1000 10.0 1464 6510 7 8/10 8″ NB FLG 8 12 Man Hole 475x425mm
10.5 12/12 12 18
12.5 12/14 14 21